Measure the area to determine how many 4-by-8-foot corrugated panels you'll need to cover the area.
Determine post placement to hold the corrugated panels. The posts will be positioned 4 feet apart to hold the panels.
Dig the post holes to a depth recommended by local fence companies. This depth generally depends on the area in which you live -- colder areas require deeper holes -- and will determine how long the posts need to be cut.
Fill in the hole with 6 inches of gravel.
Set the posts into the concrete and brace them with lumber and rope.
Fill the hole with the premixed, fast-setting concrete. Allow the concrete to cure for at least four hours.
Cut the 2-by-4-inch lumber for the frame of the panels. Cut 2 pieces to fit along the sides of the panels and 2 pieces to fit along the top and bottom edges of the panels. Use the router to cut a groove in each of the 2-by-4-inch pieces to hold the corrugated panels. The size of the groove will be determined by the gauge of the corrugated material.
Stain the wooden frames to a desired color. Allow the stain to dry thoroughly.
Apply a polyurethane clear coat to protect the wood surface and allow the wood to dry.
Paint the panels with galvanized paint to protect the surface. Allow the paint to dry completely before handling the panels.
Attach the frame to the panels using galvanized screws.