Move the Greenlee's handle to the upwards position. This adjusts the device for the loading of the pipe.
Choose the correct size bending shoe for the size and type of conduit you are bending. Each shoe is stamped for its application.
Insert the bending shoe on the pivot shaft and lock in place with the snap spring clip on the end of the pivot shaft.
Insert the cushion roller in the proper hole and lock in place with a cotter pin. A decal on the bender's frame indicates the proper hole.
Insert the conduit into the bender laying it flat along cushion roller and the front edge hook. Align the front edge of the hook with the location on the pipe you want to bend.
Rotate the ratchet handle to the horizontal position then move the bend control handle to the "Bend" position.
Push the ratchet handle to the "Up" position with your hands. Rotate the ratchet handle back to the horizontal position and remove the pipe.