Unlike an incandescent light, your fluorescent lamp relies on the movement of electrical current through gas. Because this gas fills the entire tube or bulb of the fluorescent lamp, the glass material itself also forms part of the conductive material. By contrast, an incandescent lamp passes electrical charge through metal and the glass bulb is immaterial. Because the humidity level of the air outside the fluorescent light directly affects the glass, it also affects the light's conductivity and performance.
When the humidity level of the surrounding air exceeds 65 percent, the electrostatic charge along the outside of the fluorescent lamp's glass tube or bulb begins to change. With the shift in electrostatic charge, the current flowing through the lamp loses electrons to the external electrostatic charge, interrupting the lamp's ability to illuminate. As a result, if you are looking to light a space where the humidity regularly surpasses 65 percent, such as a poorly ventilated kitchen, standard fluorescent lamps may not suffice.
While humidity can negatively impact some fluorescent lights, it's still possible to use them in humid areas, such as kitchens, as well as greenhouses, bathrooms or outdoor areas. Opt for lights with silicon coatings, which keep the humidity from affecting the tube's electrostatic charge. Some compact fluorescent lightbulbs (CFLs) are marked as weatherproof.
Even if you use a weatherproof fluorescent light with a silicon coating, certain conditions may still cause humidity to interfere with its proper functioning. Keep the tube or bulb clean from dust, which can reverse the benefits of the silicon surface. One solution is to house any fluorescent lights in closed light fixtures. If the tube or bulb of the light is located too close to its metal housing, the lack of space can also interfere with proper functioning. Just as humidity can draw electrons to the surface of the tube, metal elements can conduct excessive amounts of electrons, compromising the lamp's performance. High humidity can shorten the life of CFLs. Running the bathroom fan or opening a window can mitigate this problem.