Molding is special trim that typically goes around the top of a wall or along the top edge of kitchen cabinets. Inside joints for molding can have a coped connection. This joint requires one piece of molding to mirror the angles of the piece to which it connects. While creating a coped-style joint is typically harder than other joint styles, it often creates a better look for the molding. A little planning and preparation can help you complete this project like a professional.
- Nails
- Hammer
- Pencil
- Coping saw
Show More
Instructions
-
-
1
Install one piece of molding into place, attaching it to the wall with nails and a hammer. The molding must be flush against the corner.
-
2
Place the second piece of molding face down on a hard surface. Use a scrap piece of molding to trace the design onto the other molding.
-
-
3
Cut out the end of the molding with a coping saw, following the traced pattern. Do not cut past the line.
-
4
Test-fit the molding into in the corner. Remove additional wood with the coping saw as necessary.