How to Fix Flashing in Satin Paint

Sand the wall with extra-fine grain block sandpaper. Sand just enough to roughen and even out any areas of thick paint on the wall.

Wipe the wall down with a tack cloth to remove all sanding dust. Use an industrial vacuum to clear up any sanding dust on the floor. Dust particles are small, easily airborne and prone to landing in finish coats. If you do not have a vacuum, sweep once. Then allow the dust to settle for 15 minutes and sweep again.

Pour a new batch of paint into a paint tray. Use high-quality paint and do not dilute. Low-quality or diluted paint often goes on unevenly. Also, different concentrations of pigment create flashing.

Apply a fresh coat of paint on the wall. Dip the roller in the paint, then roll it on the tray. Getting rid of excess paint this way will prevent creating thick and thin layers of paint that result in flashing in the finished coat. As you paint, work quickly so you are always leading with a wet edge. Paint from one end of the wall clear across to the other. Don't try to join up dried sections. Painting over partially-dried paint creates uneven layers.