How to Make a Level Transition Between a Laminate Floor & a Tile Floor

While there are many moldings for making smooth transitions between laminate and other flooring types, most are designed for floors that are level or lie lower than the laminate. When laminate butts up to ceramic tile, the ceramic floor is often 5/8 inch higher, so typical moldings won't work. If it happens the two floors are level, installing a "T" molding into a metal track and leaving room for an expansion gap on the laminate side does the trick. Otherwise, create a custom molding to taper the difference in elevation.

Measuring tape
Shoe molding or quarter round
Handsaw
Stain
Jointer plane
Hammer
Finishing nails

Instructions

- 1
  Use a tape measure to determine the length of the doorway where the floor transitions from laminate to ceramic.
- 2
  Measure the difference in height between floors. Plan to use shoe molding for a height difference of 1/2 inch. Use quarter round for a height difference of 5/8 or 3/4 inch.
- 3
  Use a handsaw to cut the shoe molding or quarter round to fit the length of the doorway. (If using quarter round, run it through the jointer plane to trim the height to 5/8 inch. If the height difference is 3/4 inch, you don't need to plane.)
- 4
  Stain the molding to match the flooring.
- 5
  Leaving room for the expansion gap, fix the shoe molding or quarter round into place with a hammer and finishing nails. Sink the finishing nails on an angle into the expansion gap near the ceramic floor.

How to Select Floor Tiles for a Bathroom

Budget Carpet Ideas

Floors & Ceilings