DIY Reglazing a Bath

Reglazing a bath is a good way to give an outdated tub a face-lift. This project can be done by homeowners for a cost-effective solution to a tub that's in an unwanted color, and can be simply done with a few basic tools. With some tips and guidance, this project can be easy and rewarding.

Safety mask
Gloves
Cleaning solution
Sponge
Primer
Sand paper
Masking tape
Newspaper
Glaze

Instructions

- 1
  Thoroughly clean the tub with cleansers and a sponge. Let it dry completely.
- 2
  Cover faucets and tile around the tub with masking tape and masking paper.
- 3
  Apply a special tub primer to the entire bathtub. Use broad strokes with the primer spray cans, making sure there is an even coat on the tub. Let dry.
- 4
  Sand the entire tub with sandpaper, removing any debris from the primer. Make sure the whole surface is smooth and clean.
- 5
  Tape newspaper to the shower walls and any areas outside the tub that may be exposed to the glaze.
- 6
  Put on a safety mask and gloves. Apply the glaze to the tub, using long, even strokes. Make sure there is an even coat on the whole tub. Let dry. If any primer shows through the glaze after it dries, apply a second coat.

Decorative Painting Ideas for Chairs

How to Stain Old Furniture

Faux Finishing