How to Make Rustic Brass Cabinet Knobs & Handles

Wash brass knobs and handles in warm soapy water. If you cannot remove them from the furniture they are on, wipe them down with a soapy sponge, then wipe the soap off with a clean, wet towel.

Rinse brass fixtures with cool water. Dry with a clean lint-free cloth.

Remove lacquer finish from the brass. Either soak it in lacquer remover or paint a coat of acetone nail polish remover on the brass and let it sit overnight. Do this in a well-ventilated area.

Rinse the brass hardware under cool water to remove the acetone nail polish remover or lacquer remover. Dry the hardware completely with a lint-free cloth.

Oxidize your brass by painting on a mixture of vinegar and saltwater. To do this, paint a generous coat of vinegar on the hardware. Let it sit. Mix 1 cup of water with 2 tbs. of saltwater. Paint the saltwater mixture over the coat of vinegar.

Soak an old rag in ammonia. Use ammonia outside, or in a well-ventilated room, while wearing protective gloves and goggles.

Place your hardware in one end of a clean, plastic container. Place the ammonia soaked rag in the other end of the plastic container. The two items should not be touching.

Close the lid of the container. The vapors from the ammonia that collect in the sealed container will tarnish the brass hardware. The time can vary on this process depending on the hardware and your aesthetic preferences. Check the hardware frequently and remove it when you achieve the desired patina.