How to Make a Range Hood Look Like Limestone

Preparing the Range Hood for Paint

• 1

  Tape off the surrounding area with plastic. Cover counter tops, cupboards and other surface to protect them from over-spray.

• 2

  Wash the entire range hood thoroughly with a household degreaser to remove any dirt and grime. Go over it again with a mixture of ammonia and water to get rid of any residue that is left over.

• 3

  Sand the entire range hood with a #150 fine grit sandpaper. Make sure to remove any gloss or shininess from the range hood to create a surface that paint can easily bond to.

Faux Painting Technique for Metal That Looks Like Limestone

• 4

  Spray paint the entire surface with a lighter cream-colored primer meant for metal. Use short even strokes to ensure smooth coverage.

• 5

  Tape off the "stones" using small strips of painter's tape, cut down to about 1/4 inch wide. Secure it to prevent leakage underneath it.

• 6

  Spray paint a light golden color, meant for metal, over the entire surface. Let dry thoroughly about one to two hours or according to the manufacturer's instructions.

• 7

  Apply a glaze in a darker golden color. Roll it on with a small paint roller and then quickly brush some off with a soft sponge. Repeat this step until the desired look is achieved.

• 8

  Allow to dry to the touch for about five minutes before removing the tape to see the finished limestone look. Allow to dry for a full 24 hours before using the range hood.