Stomp Ceiling Techniques

Execution

• Stomp ceiling techniques use a variety of brushes to create different textures. Round or oval bristle brushes can create an imprint in wet plaster; large plastic bags or crumpled-up plastic sheets pressed into the plaster also create interesting textures. The technique involves rolling plaster onto the ceiling and then pressing the chosen tool into the surface. Clean your tool often using water so the imprint is clean and does not contain excess wet plaster.

Material

• One material commonly used to apply a stomp technique is joint compound. Artisans use joint compound because it is readily available in nearly all areas, and relatively inexpensive. Always mix the joint compound prior to beginning the project to ensure it is moist and has a smooth consistency.

Price

• Surprisingly, a textured ceiling application often costs less and is less work than leaving a ceiling with a smooth finish. Creating a perfectly smooth, flawless finish on a ceiling is difficult and time-consuming, but a applying a stomp ceiling is fast and hides any installation flaws. This actually saves the homeowner or contractor both money and time.

Finishing

• It's acceptable to leave the plaster unpainted once it is dry, but this finish attracts dust and is difficult to clean. Finishing a stomped plaster ceiling typically involves applying two coats of paint. The ceiling often immediately absorbs the first coat of paint; the second coat is the outer coating. Additional stains and color washes brushed over the plaster can create a distressed and antiqued ceiling finish.