Take the measurements for the fabric. Measure from the floor on the side of the daybed to the center of the ceiling above the daybed. Measure the length and depth of the daybed.
Cut three panels of fabric in colors that coordinate with the room decor, based on the measurements. Use a sheer fabric such as tulle to allow light to pass through or a thick fabric like canvas for a thicker, natural look.
Cut three pieces of fabric to that length and a width of at least 44 inches.
Open and separate the two rings of an 18-inch embroidery hoop. Cut two pieces of ribbon that are 22 inches long. Tie one ribbon across the inner ring of the embroidery hoop. Tie the other ribbon across the inner ring to form an “X” shape.
Fold about 2 inches of fabric over the outer ring of the embroidery hoop. Insert the inner ring into the outer ring and tighten to secure the fabric.
Drill a pilot hole into the ceiling at the center of the daybed. Screw a pot rack hook into the pilot hole. Slip the fabric “X” in the center of the embroidery hoop over the hook to mount the canopy.
Drape the center piece of fabric along the back of the daybed and the other two on either side to complete the canopy.