Herman Miller CSS Shelving Assembly Instructions

If lack of storage space is an issue you contend with, Herman Miller shelving may be a solution. Herman Miller is a Michigan-based manufacturing company that specializes in producing eco-friendly and ergonomically designed office furniture and storage products like CSS shelving. The CSS shelving system is composed of horizontal and vertical support beams and brackets that hold shelves. It takes approximately two to three hours to install a CSS shelving system.

Flat-head screwdriver

Instructions

- 1
  Remove the contents and check to make sure all pieces of the CSS shelving unit are present and accounted for.
- 2
  Screw the feet onto the bottoms of the vertical support beams.
- 3
  Attach the wall support beams to the top rear of the vertical support beams using a flat-head screwdriver to tighten the assembly screws.
- 4
  Mount the horizontal support beam across the bottom of the four vertical support beams using the screwdriver and assembly screws.
- 5
  Set the shelving unit upright and then attach the wall support beams to the wall using the wall with the anchor screws in the kit.
- 6
  Mount the shelf brackets on the frame with the screwdriver and then set the shelves in place.

Painting Over Wood That Has Been Polyurethaned

Painting Wood Curtain Rods

Decorating Materials & Supplies