How to Hang Frames With a Wire From the Ceiling

Hanging picture frames from the ceiling provides an alternative when you’re searching for a distinctive look or when wall space isn’t available. It also provides a method to display artwork in a nontraditional yet modern way through a room, since suspended picture frames create an illusion of floating in space. Have someone you can call on for assistance during the process, as climbing a ladder unspotted can be dangerous, especially while lifting a heavy frame.

2 eyehooks
Stud finder
Pencil
Drill
Measuring tape
High-tension airplane wire
Wire rope clip

Instructions

- 1
  Screw a single eyehook at the top center of your picture frame. Use a drill to create a starter hole for easier installation if necessary.
- 2
  Locate a stud in your ceiling in the area where you plan to hang the picture. Mark the spot with a small pencil mark.
- 3
  Drill a pilot hole into the ceiling and stud. Screw an eyehook into place.
- 4
  Measure down from the ceiling eyehook to the point where you want the top of the picture. Add 6 inches to the measurement and cut a piece of high-tension airplane wire to that length.
- 5
  Thread the high-tension airplane wire through the ceiling eyehook and fold it over 3 inches. Snap a wire rope clip into place to secure the wire. Repeat the threading and securing process on the eyehook of the picture frame to complete the hanging.

How to Make Headboards From Homemade Materials

How to Build a Child's Nook

Decorating Materials & Supplies