Instruction Manual on How to Use a Baby Ben Westclox

Set the time on your Baby Ben by turning the larger knob on the back of the clock. Both hands will rotate together, with the hour hand advancing one number every time the minute hand circles the face. Turn the knob until your clock hands are in the correct position.

Set the alarm on the Baby Ben Westclox by turning the smaller knob on the back of the clock. The alarm indicator is one hand, so point it to the hour closest to when you want to get up. The alarm will go off every 12 hours if left on.

Wind the clock and the alarm at the same time by turning the key on the back of the clock. Turn the key until the mechanism is difficult to work, but don't force it.

Turn the alarm on by pulling out the alarm stem at the back of the clock. When the alarm time arrives, the clock will ring for 10 seconds. Turn the alarm off by pushing the alarm stem back in the clock.

Set the Baby Ben Westclox on a flat surface such as a nightstand, a table or the floor. Don't try to hang this clock on the wall, as it's not designed for this use.