How to Change the Bearings on a Bosch Washing Machine

Turn off the Bosch washing machine and disconnect it from the power source.

Remove the screws that hold the top panel in place, and slide the top panel off. Remove the screws that hold the control panel in place, and remove it from the unit. Snap the kick plate off the unit and disconnect the hose. Remove the rest of the screws that hold the front panel in place.

Use a screw driver to pry out the boot spring, and pull the boot off the door. Remove the screws that hold the door in place. Pull the front panel off the unit, and set it aside.

Use pliers to disengage the detergent-hose clip, and remove the detergent tray. Remove the screws that hold the counterweights in place, and set the counterweights apart. Remove the wires from their connectors in the tub. Remove the train hose from the tub. Remove the screws that hold the motor in place, and set the motor aside.

Remove the drum from the unit. Rest the tub on wooden blocks to avoid breaking any pieces that stick out from it. Use the socket wrench to remove the pulley from the back of the tub. Remove any screws holding the tub together, and disengage the plastic tabs. Pull apart the rear and front assemblies from the tubs.

Use the mallet to pound out the bearings in the front and rear assemblies. Use the mallet to pound in the replacement bearings. Reassemble the Bosch washing machine. Restore power to the unit. Use as desired.