# How to Close a Cabrio Washer Cabinet
The housing of your Whirlpool Cabrio washing machine is referred to as a cabinet. It's this front housing that protects the internal components of the washing machine. If you are having problems with your machine, such as the drain hose isn't functioning properly, before repairs can be made, you need to diagnose the problem by removing the cabinet. After you assess the repair, replace and close the cabinet.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Power off your Whirlpool Cabrio washing machine and unplug the power cord.
-
2
Fit the cabinet frame over the body of the washing machine so the front control panel is facing you.
-
3
Press the cabinet frame firmly into the base until the spring clips on the cabinet top lock in place.
-
4
Insert the wiring harness plug at the bottom of the control panel into the port at the top of the washer base.
-
5
Pull the top cover of the washer control panel down until the hinges lock in place.
-
6
Replace the screws on the caps located at either end of the control panel.
-
1
Washer & Dryers
- How to Install a Washing Machine Actuator
- How to Diagnose Washing Machine Bearings
- How to Repair a Whirlpool Calypso Washer
- How to Replace the Counterweights in a Washing Machine
- How to Replace a Rubber Gasket on a Kenmore Washer
- How to Install a Drain Pump on a GE Washer
- How to Disassemble a Cabrio Washer
- How to Disassemble a Frigidaire Affinity Washer
- How Do I Replace a Maytag LAT4916AAE Washer Motor?
- How to Replace a GE Washer Door Gasket
- How to Fix the Belt on a GE Washer
- How to Freshen a Washing Machine
