Deactivate the safety function if you need to manually interrupt a cycle. Press the "Start/Pause" button on the control panel. Open the unlocked door, and add more clothes. Press "Start/Pause" again to resume the cycle.
Choose a final cycle or spin speed if "No Final Spin" is lit up on the LCD display. First, open the door and remove your clothes. Turn the "Cycle Selector" knob to select "Spin" or "Drain." Alternatively, press the "Spin Speed" button to light up an indicator for a spin speed, such as "Max Spin." Press the "Start/Pause" button to resume final spin operations in the washer.
Initiate emergency unlocking procedures. Turn the "Cycle Selector" knob to the "Off" position. Unplug the washer's power cord from the electrical outlet in the wall. Open the service door located at the bottom of the washer. Loosen the screws, and pull out the protective foil. Expose the emptying hose from the holder. Remove the cap on the hose, and drain the suds from the holder into a container. Replace the cap, push the hose back in and then screw on protective foil. Pull the emergency unlock out with pliers to release the latch. Open the front-loading door on the washer. Replace and close the service door.