How to Fix a Hotpoint Washer Timer Knob

Hotpoint washing machines are sold in department stores, home improvement centers and appliance stores. The timer knob on the Hotpoint washer turns the machine on or off and selects the type of wash cycle. The timer starts or stops each wash or rinse function. Without a serviceable knob, it may be difficult to operate your machine. Replacement knobs are available from Hotpoint and can be installed in just a few minutes.

Hooked tool
Flat blade screwdriver (Optional)
Wire coat hanger (Optional)
Wire cutters (Optional)
Pliers (Optional)

Instructions

- 1
  Unplug the washer's power cord from the wall outlet.
- 2
  Pull the knob straight out as if you were starting the machine. Twist the knob 180 degrees so that the U-shaped portion of the knob's retaining clip is facing the edge of the machine.
- 3
  Insert a small hooked tool underneath the flange of the knob from the edge of the machine. Work the hook into the U-shaped portion of the clip. Pull the tool straight out toward the edge of the machine to slide the clip out. Set the clip aside.
- 4
  Pull the knob straight off of the control panel.
- 5
  Flip the replacement knob over so that you are looking at the underside. Locate the slot in the shaft of the knob. Insert the clip into the slot until it stops.
- 6
  Push the hole in the shaft of the knob onto the timer shaft protruding from the washer control panel. Push down on the knob until the clip snaps into place. Pull up on the knob to ensure it is secured to the shaft properly.
- 7
  Plug the power cord back in.

What Is a Thermal Limiter Used For on a Dryer?

How to Troubleshoot the Pump on a Fisher Paykel Washing Machine

Washer & Dryers