# How to Replace the Lid Lock on a Maytag Bravos
Things You'll Need
- Phillips screwdriver
- Needle nose pliers
Instructions
-
-
1
Move the Maytag Bravos washer away from the wall, then unplug the power connector from the wall outlet.
-
2
Remove the three screws from the back of the control panel using a Phillips screwdriver.
-
3
Lift the control panel toward the front of the washer. Locate the lid lock control connected to the top door of the washer.
-
4
Disconnect the wires to the lid lock control using needle-nose pliers.
-
5
Remove the screw connecting the lid lock control to a mounting plate, using a Phillips screwdriver.
-
6
Lift and remove the entire lid lock control. Reinsert a new lid lock control part into the same position.
-
7
Reinsert the screw into the mounting plate to hold the lid lock control in position.
-
8
Reconnect the wires to the lid lock control. Lower the control panel back into place.
-
9
Reinsert the three screws into the back of the control panel, then reconnect the power supply to the wall outlet.
-
1
- How to Replace the Lock on an FR322
- How To Replace the Igniter on a Maytag Oven
- How to Get Rid of the Control Lock on My Dishwasher
- How to Replace the Air Damper Control on a Frigidaire
- How to Remove the Shell of a Maytag Bravos
- How to Replace the Control Pad on a Maytag Microwave Oven
- How to Replace the Temperature Control of a Haier Freezer
- How to Replace the Hall Sensor on a Maytag Neptune MAH8700
- How to Change the Belt in a Maytag Bravos Dryer
- How to Replace a Broken Washer Lid Lock
- How to Replace the Door Lock Switch Assembly on an AFT6000FSO
- How to Replace the Motor Controller in a Maytag Neptune
