How to Disassemble a Frigidaire Affinity Washer

Unplug the Frigidaire Affinity's power cord from the electrical outlet before you begin disassembling the appliance. Pull the machine away from the wall so you can access the back. Remove the screws securing the top panel to the machine using a Phillips screwdriver. Slide the top back slightly and lift it away from the machine.

Pull the soap dispenser drawer out of the washing machine. Depress the retaining clip at the back of the soap dispenser and pull the drawer away from the machine. Remove the screws from the soap dispenser housing and at the top of the control panel using a Phillips screwdriver. Push in on the control panel retaining clips and lay the panel on top.

Pull the wire clamp and spring away from the outer edges of the door gasket with a pair of needle-nose pliers. Peel the boot away from the edges of the door opening and push it into the washing machine. Remove the screws from the door latch and push the latch into the washing machine. Raise the front of the appliance up and slide a wood block under it.

Remove the screws from the bottom of the front panel with a Phillips screwdriver. Remove the block from under the Kenmore washer and set the machine back onto the floor. Remove the retaining screws from the top of the front panel with the Phillips screwdriver.

Raise the panel up and pull it away from the frame. Unplug the wiring harness on the front panel. Make the necessary repairs to the washing machine as you now have access to all replaceable parts.