# Disassembling a Whirlpool Refrigerator's Door Bezel
A refrigerator door bezel sits inside the unit. This is the liner that separates the outer surface of the door from the inside of the refrigerator. This is true regardless of what company manufactured your appliance. The bezel consists of two pieces: the liner and the gasket. Removing the bezel can give you access to resources embedded in the door, such as an ice dispenser, or be part of dissembling the entire unit.
Things You'll Need
- Phillips screwdriver
- Nut driver
Instructions
-
-
1
Open the refrigerator door and slide your finger under the gasket, or rubber piece that creates a seal between the door and body of the refrigerator.
-
2
Remove the screws holding the gasket in place and pull it off the door. The screws sit around the edge of the door under the gasket.
-
3
Pull off the nuts around the door. Slide a nut driver over the ends and turn it counterclockwise. Remove all the visible nuts with the driver.
-
4
Push your fingers under the bezel after the nuts are off. Pull the bezel toward you until it comes free from the door.
-
1
Refrigerators
- How to Realign a Door on a Domestic Refrigerator
- How to Install the Door Dispenser Kit on a Whirlpool Refrigerator
- How to Replace the Tube in a Whirlpool Refrigerator Door
- How to Repaint a Refrigerator Door
- Disconnecting the Water Line From a Whirlpool Refrigerator Door
- How to Disassemble a Double Door Whirlpool Refrigerator
- There Is a Knocking Sound When Opening the Door of a New Whirlpool Refrigerator
- How to Remove a Door Water Dispenser on a Whirlpool Refrigerator
- How to Replace the Water Tube Door on a Whirlpool Refrigerator
- How to Fix Whirlpool Refrigerator Door Hinges
- How to Switch the Hinges on a Whirlpool Refrigerator
- How to Fix the Icemaker Flap on a Whirlpool Refrigerator
