# How to Fix an Amana AFI2538AES Freezer Handle
Things You'll Need
- Masking tape
- Hex key, 3/32-inch
Instructions
-
-
1
Apply masking tape to the face of the drawer where the handle attaches. Cover at least 3 or 4 inches of space around the handle to avoid scratching the surface with the handle or tools.
-
2
Look along the bottom of the metal freezer handle where it attaches to the freezer door. Find the small setscrew openings on the handle near the door.
-
3
Insert a 3/32-inch hex key into the small opening. Push the handle against the drawer face as you turn the internal setscrews clockwise to tighten them.
-
4
Loosen the freezer handle setscrews by turning them counterclockwise with the 3/32 hex key, if you need to replace the handle. Pull the handle off the handle mounts and away from the door face.
-
5
Install the replacement Amana freezer handle over the mounts. Make sure the internal setscrew openings face toward the floor.
-
6
Insert the hex key into the setscrews' openings. Push the handle against the drawer face as you turn the internal setscrews clockwise to secure the handle to the freezer drawer.
-
1
- How to Fix the Handle on a B & D Electric Mower
- How to Fix a Frigidaire Freezer Light
- How to Fix a Shorted Freezer
- How to Fix a Jenn-Air Freezer That Is Buzzing
- How to Fix a Fireplace Damper Handle
- How to Fix a Broken Well-Pump Handle
- How to Fix a Maytag Fridge's Freezer Leakage
- How to Fix a Drive Cup on a GE Freezer
- How to Fix a Kenmore Refrigerator Door Handle
- How to Fix LG Freezer Ice Maker Problems
- How to Fix an Exterior Door Handleset
- How to Fix an Axe Handle
