Open the door on your GE refrigerator and locate the gasket, which is the rubber pieces on all sides of the door.
Move along the door and unsnap the white door cover next to the gasket. Set the cover aside.
Push the door gasket back with your fingers to expose the gasket bracket clips.
Insert a flathead screwdriver into each of the four clips and pry the clips off.
Pull off the entire gasket from the door and set it aside.
Place the new gasket into the same position as the old one, then snap the four bracket clips back into place.
Place the door cover back over the edges of the gasket so it snaps into place. Close the refrigerator door.