# How to Remove the Evaporative Drip Pan on a Jenn-Air
Like all refrigerators, the Jenn-Air refrigerator produces evaporative condensation due to defrosting. To prevent this moisture from accumulating on your kitchen floor, a drip pan is installed on the unit. This pan catches the condensation from the fridge's components. If water is leaking to the floor, the drip pan is likely faulty and needs to be replaced.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Pull the Jenn-Air refrigerator away from the wall so you can access the rear of it. Unplug the refrigerator power cable.
-
2
Remove all screws on the rear panel of the fridge and take off the rear panel. The internal components will now be exposed.
-
3
Look to the bottom of the refrigerator to locate the drip pan. Remove any screws on the sides of the pan.
-
4
Slide the pan toward you and out of the refrigerator. You can now clean and replace the pan or slide a new one in its place.
-
1
Refrigerators
- How to Remove the Oil Platform From a Refrigerator
- How to Remove the Center Post on a Whirlpool Refrigerator
- How to Remove the Frame of a Frigidaire GLHS267ZA
- How to Remove the Compressor Cover on a GE Refrigerator
- How to Remove a Condensate Drip Pan
- How to Remove the Pan Seal on a Jenn-Air Cooktop
- How to Remove the Front Panel in a GE Profile Refrigerator
- How to Remove the Freezer Floor in a Kenmore Refrigerator
- How to Replace the Drain Pan on a GE Monogram Refrigerator
- How to Remove the Front Panel From a Fridge
- How to Drain the Pan Under a Whirlpool Refrigerator
- How to Clean the Drip Pan From a Maytag Fridge
