How to Fix a Kenmore Elite Ice Maker That Is Pouring Out Water?

The Kenmore refrigerator with a built-in ice maker/water dispenser receives water from the water supply line located on the back of the appliance and filters water through the refrigerator's cartridge to provide clean ice and water. A new cartridge replacement is initially filled with tap water to clear out sediment and air. The cartridge requires thorough flushing before it operates normally, as water will continuously leak from the ice maker when a new cartridge is installed but not flushed. The refrigerator also requires calibration of the dispenser, which configures the proper pressure for dispensing water.

Large measuring cup

Instructions

- 1
  Set the measuring cup underneath the water dispenser. Press and release the water dispenser for five seconds at a time until three gallons of water is dispensed into the measuring cup.
- 2
  Pour out the measuring cup's water and set the cup underneath the dispenser. Hold "Settings" and "Lock" on the refrigerator's front control panel simultaneously for three seconds. The control buttons prepare the water dispenser for calibration mode, which configures the refrigerator's measured fill feature.
- 3
  Release the buttons, and press your hand against the water dispenser lever to fill the measuring cup up to 1 cup of water.
- 4
  Release your hand from the lever to stop filling the measuring cup and complete the calibration mode.

My GE Profile Arctica Stopped Making Ice

Howling Noises in the GSH22SGRE Refrigerator

Refrigerators