How to Replace the Water Cavity on an Amana SXD25S2E

If you own an Amana SXD25S2E model side-by-side refrigerator, you have an ice dispenser on the left freezer door that dispenses ice and water. The plastic part of the dispenser that catches any spilled or leaking water is called the water cavity and it is connected between the dispenser frame and dispenser itself. If you notice a crack or any other type of damage on the water cavity, you can manually replace the part at any time with a new part.

Phillips screwdriver

Instructions

- 1
  Move your Amana SXD25S2E model refrigerator away from the wall and unplug the power cord from the wall outlet.
- 2
  Lift out the the drip plate in the front of the ice dispenser using your hands and unscrew the light bulb at the top of the dispenser frame.
- 3
  Remove the two screws from the bottom of the dispenser frame using a Phillips screwdriver. Pull off the silver switch cap on the top left corner of the dispenser frame.
- 4
  Pull out the dispenser frame toward you to expose the water cavity. Remove the screw at the bottom center of the cavity.
- 5
  Press down on the clip at the bottom of the cavity and pull the entire part upward. Pull the cavity toward you and out of the ice dispenser.
- 6
  Insert the new cavity part into the same position and press into the dispenser unit so it connects to the clip. Reinsert the screw into the bottom of the cavity.
- 7
  Place the dispenser frame back over the cavity and push the switch cap back on, into the top left corner.
- 8
  Reinsert the bottom screws to the dispenser frame and place the drip plate back onto the bottom of the dispenser. Plug the power cord back into the wall outlet.

Replacing the Surface of a Schott Ceran Eco-Friendly Whirlpool Stove

Types of Ammonia Absorption Refrigerators

Refrigerators