Unplug your refrigerator and move it away from the wall.
Remove the contents of the refrigerator along with the utility bins and trays on the insides of the doors.
Remove the screws on the base grill panel at the bottom of the refrigerator. This will expose the water tubing and wiring bundles. On some models of refrigerators, the wiring bundles and water lines may be located above the doors or in another location. You will need to consult your user manual or service guide in order to find the water lines and wiring bundles.
Unplug the water connector tubes at the seals of the tubes.
Remove the P-clamp on the small wiring bundle with your socket wrench.
Remove the clip from the large wiring bundle with your wrench.
Pull the wiring housing out of the bottom of the refrigerator so you have access to the ports. Unplug the wiring from the ports.
Close the refrigerator doors and locate the hinges on the top corners of the doors.
Remove the raised screws on the hinges with your allen wrench
Lift one of the doors straight up to remove it from the hinges. Repeat with the other door.
Fit new doors on the refrigerator and replace the hinge screws.
Plug the wiring into the ports and replace the clamps. Plug in the water tubes and replace the base frame. Replace the bins in the fridge doors.