Defrosting of a Kenmore Ice Maker

Since Kenmore's beginnings as an appliance company in 1927 with an early version of the modern-day washer, the company has expanded its product offerings to an array of appliances, including a line of freestanding ice makers. The ice makers pull from a water line to make a constant supply of ice. You may need to defrost the ice maker if you plan on moving it or shutting it down for an extended period.

Ice scoop
Flat-head screwdriver
Towel
Small bucket

Instructions

- 1
  Unplug the ice maker and remove all of the ice. Use an ice scooper to quickly remove the ice and protect your hands from the cold.
- 2
  Shut off the water supply line to the ice maker.
- 3
  Remove the four screws holding the front lower panel in place, using a flat-head screwdriver. Two screws are on the top of the panel and two are on the base grille, directly underneath. Pull the panel out and set it and the screws aside.
- 4
  Place a towel under the center of the ice maker. Unscrew the inlet and outlet water lines from the water valve. Allow the lines to drain before reconnecting them to the water valve. Remove the towel and screw the front panel back into place.
- 5
  Position a small bucket under the drain cap at the bottom of the water pan. Unscrew the drain cap and allow the water pan to empty.
- 6
  Allow the ice maker to fully defrost and dry out to avoid mold or mildew growth. Replace the drain cap.

Smallest Oil Fired Boiler

Rattling Noise From the Burners on a Bryant Two-Stage Furnace

Other Home Appliances