How to Replace Glass on a Frigidaire Range Door

The majority of Frigidaire ranges have a glass panel in the oven door that allows you to see through the oven door and into the oven compartment. This allows you to maintain a consistent temperature inside of your oven, while at the same time monitoring your food as it cooks. If a heavy object is dropped on the glass pane, it may break, at which point you must turn off the oven, only resuming use when the glass pane is replaced.

Leather-faced gloves
Flat-head screwdriver
Phillips screwdriver

Instructions

- 1
  Open the oven door, and remove any broken glass fragments from the door. Wear leather-faced gloves to protect your hands from cuts.
- 2
  Flip the hinge locks down, toward the oven door, and then close the door to the broil-stop position. Lift the door up and off the range, and then place it face down on a solid surface.
- 3
  Remove the door handle screws, from the top of the inner door panel. Remove the screws on the bottom of the door.
- 4
  Lift the inner door panel out of the outer door panel.
- 5
  Remove the screws securing the door hinges to the inner door panel. Lift the inner door panel and remove the hinges from the underside of the panel.
- 6
  Flip the inner door panel over.
- 7
  Remove the screws securing the glass retainer panel, which surrounds the door glass.
- 8
  Lift the glass frame out of the door, and remove any remaining glass fragments.
- 9
  Insert the new glass panel and frame, and then reassemble the door by reversing the steps used to take it apart.
- 10
  Reinstall the door by reversing the steps taken to remove it.

How to Replace a Frigidaire Oven Hinge

How to Troubleshoot the Hot Surface Ignitor of a Gas Furnace

Other Home Appliances