To prevent unnecessary repairs, install the drawers in accordance with Electrolux guidelines. Drawers should sit out of direct sunlight and away from all heat sources. Plug the drawer's power cord into an outlet able to accommodate 120 volts. Do not install the drawer fronts behind an enclosed area; the front grill must remain clear. Place the drawers on a flat surface capable of supporting the weight of the drawers, even when full.
To prevent problems with your Electrolux undercounter refrigerator drawers, keep the unit maintained. Clean the exterior weekly with a stainless steel cleaner to remove surface debris and prevent rusting. Do not clean the unit with steel wool pads or cleaners intended for glass or tile. Clean the interior as often as necessary with a solution of warm water and a mild detergent. Disconnect the power before cleaning the unit. Also, remove the air filter when it appears dirty. Fully extend the bottom drawer and slide out the filter on the lower left wall of the cabinet and slide a new filter into the housing.
If the appliance is not sufficiently cold or is too cold, press and hold the "+" or "-" buttons to adjust the temperature. If adjusting the temperature does not fix the problem, ensure that the front grill is not blocked. If the interior light does not work, the LED assembly is possibly broken; contact a service technician for assistance. If the interior light does not go out when the door is closed, the door switch is not making contact. Check the door for proper alignment and adjust as necessary.
If you are unable to troubleshoot and repair the unit, contact or consult with a qualified appliance repair person for assistance. If repair is necessary, contact the dealer where you bought the unit. Provide the dealer with the model name and serial number, located on the unit's ceiling. Contact Electrolux directly if you are unable to receive assistance from the dealer. Electrolux typically provides a one-year warranty for all repair or replacement costs associated with defective parts.