# Getting Hot Water Out of Culligan Dispenser
Many Culligan water coolers also dispense hot water. Some dispensers have an easy-to-use hot water tap, others have a button that represents hot water. The Culligan Executive Bottle-free Cooler and others like it dispense hot water, along with warm and extra-hot water. Each water temperature is represented by its own button, but the preferred temperature water will only pour out if buttons are pressed in the right sequence, the correct number of times or for the correct amount of time.
Instructions
-
-
1
Dispense ambient-temperature or warm water from the Culligan water dispenser. Push in the "Room Temperature" button to the right of the "Hot Water" button until the backlight is lit green. Then push the "Dispense" button and it will dispense warm/room temperature water.
-
2
Press and hold the "Hot Water" button located next to the "Dispense" button for three seconds. Then push in the "Dispense" button and the Culligan machine will dispense hot water.
-
3
Collect extra hot water from the Culligan Dispenser. Push the "Hot Water" button twice within one second. The LED in the middle will light orange, and the dispenser will begin to heat the water. The Culligan machine LED will turn red when the extra hot water is ready to dispense.
-
1
Previous:
Other Home Appliances
- Getting the Dill Pickle Smell Out of Plastic
- My Culligan Faucet Filter Is Not Working
- My Shower Is Overheating
- Why Won't the Water Dispenser on My Fridge Come Out?
- How to Replace the Lever on a Hot Water Dispenser HOT-1
- How to Make Shower Water to Come Out Hot Sooner
- How to Install the Insinkerator Hot Water Dispenser
- Getting Burns Out of a Stainless Pan
- Is Bleach Best in Hot Water?
- Why Is Calcium Falling out of My Hot Tub Water?
- How to Get Water Out of My Hot Tub Cover
- How to Keep Pool Water From Getting Hot
