Instructions for Tram Glass Mounts

The Tram glass mount for the all-band scanner antenna is 28 inches in size. The mount is center-loaded and can cover 25 to 13 MHz frequencies with a 17-feet coaxial cable and Bayonet Neill-Concelman -- BNC -- connector. A BNC connector is usually used to terminate coaxial cable. Designed to pick up various radio signals and channels, the Tram receiver is approximately 1 1/2 inches high, 30 inches long and 5 inches wide.

Things You'll Need

• Glass cleaner
• Clean cloths

Show More

Instructions

1. • 1

     Clean both sides of the window surface with glass cleaner and then wipe dry thoroughly.

   • 2

     Line up the perimeters of each side of the mount to both sides of the glass.

   • 3

     Press firmly on both sides to bond the mount to the glass.

   • 4

     Connect the cable and plug the cable to the desired scanner or radio.