How to Flush an Extrol Water Well Tank

Amtrol X-Trol well tanks are pre-pressured with a sealed air charge and are made out of high-strength steel. The pressurized tanks have a 150-pound per square inch pressure rating and an agitator that moves the water to prevent the buildup of sediment. Over time, however, the water tank might need to be flushed to remove debris. Only adults should flush the Xtrol water well tank and only if they are confident of their ability to do so safely.

Things You'll Need

• Adjustable wrench

Show More

Instructions

1. • 1

     Fill the Xtrol well tank until the pump automatically turns off.

   • 2

     Open one of the drain valves to drain the water from the tank.

   • 3

     Adjust the cut-in adjustment screw -- situated on the top of the pump -- clockwise slightly with an adjustable wrench, if the water flow pauses during draining.

   • 4

     Close the drain valve and allow the tank to refill, monitoring the time necessary to refill.

   • 5

     Open the drain valve again and watch to ensure that you don't have any more drainage pauses. If so, adjust the adjustment screw again. If not, refill the tank.