How to Increase Water Pressure With a Watts Feeder Valve

Watts is a company that makes a wide range of plumbing and home water products. One item it makes is the feeder valve, which is a water regulator. It helps to reduce water flow, which in turn saves money and water. However, if the pressure is too low it can adversely affect water-based activities, such as showering and dish cleaning. Fortunately the feeder valve is adjustable, and you can increase the water pressure.

Things You'll Need

• Adjustable wrench
• Screwdriver

Show More

Instructions

1. • 1

     Locate the water heater or boiler in your home or building. Locate the cold water line running to the boiler.

   • 2

     Locate the feed water regulator feeder valve on the cold water line between the shut-off valve and the boiler drain.

   • 3

     Loosen the locking nut on the regulator feeder valve. Slowly turn the adjustment screw clockwise to increase the water pressure.

   • 4

     Tighten the locking nut when finished. Readjust as needed until the desired pressure is reached.