Drill a hole through the end of the smoker firebox to connect the burner to the propane tank hose. The size of the hole depends on the size of the burner and hose fittings. Analyze the fittings for the burner and gas hose to make the proper connection for the burner through the end of the firebox. If the burner has air vents, make the hole larger enough to allow airflow through the vents.
Mount the burner in the firebox. The burner should be solidly positioned on the bottom of the firebox. If the burner has a thread bolt on the bottom, drill another hole through the bottom of the firebox and secure the burner with a washer and nut.
Attach the propane tank to the burner assembly. The pressure regulator will screw onto the propane tank with the plastic collar. Hand tightened the regulator only. The gas line attaches to the burner with an included SAE fitting, which is screwed on to the matching threads on the burner. A wrench of the appropriate size should be used to tighten the fitting. Check for leaks and ignite the burner to check the operation of the burner. If you purchased an adjustable pressure regulator, work with the regulator to find the best setting for the burner flame.
Set up the smoker to make smoke with a wood chip container and possibly a water pan. The wood chips can be placed in a metal pan above the burner on the former charcoal grate where they will smolder and smoke. Another option is to use a large can, like a metal coffee can, open on one end with a large chunk or several large chunks of wood. The can is place sideways above the flame with open end towards the cooking section to direct the smoke. A pan of water in the smoke chamber will add moisture to the smoke, increasing the effectiveness of the smoking.