Problem With the T3 Travel Dryer Motor Blowing Out

The T3 Featherlight Journey is a professional travel hair dryer that is compatible with domestic and international electrical outlets. The T3 requires the correct voltage setting when traveling -- 110 volts overseas and 220 volts in North America. A power adapter is also necessary during international travel and must be purchased separately. If you encounter a motor blowout with the T3 Featherlight, the two-year limited warranty may cover replacement. A motor problem should not occur if you follow the manual's instructions and use a power adapter overseas.

Things You'll Need

• Power adapter (for international use)

Show More

Instructions

1. • 1

     Check the filter cap of the T3 Featherlight for the SoftAire filter. The filter should be in place before each use.

   • 2

     Remove the SoftAire filter from the filter cap. Run the filter under cold water to remove any hair or debris. Air dry until thoroughly dry. Replace the filter in the filter cap.

   • 3

     Press the red reset button on the Featherlight T3 plug if the dryer turns off without warning. If the problem persists, replacement may be necessary.

   • 4

     Set the T3 Featherlight to 110 volts when operating the dryer overseas with a power adapter.