WB36X10003 light bulbs are incandescent bulbs intended to be used as replacement bulbs in many GE, Hotpoint and RCA over-the-range microwaves. The light bulbs are installed on the bottom of the microwave, and used to illuminate the surface below, which is often a stove. GE microwaves have either one or two light sockets on the underside, and the light bulbs are protected by a plastic light cover, which is secured by a single screw.
Instructions
-
-
1
Unplug the microwave's power cord from the wall outlet.
-
2
Remove the screw on the side of the light cover. Lower the cover.
-
-
3
Remove the white adhesive on the light bulb using your fingers if removing a factory installed light bulb.
-
4
Unscrew the light bulb. Screw the WB36X10003 into the light socket.
-
5
Raise the light cover back into position. Secure it using the screw that was removed.
-
6
Restore power to the microwave to complete the installation.