# How do I Remove a Sharp Undercounter Microwave From the Wall?
When it comes time to replace your old Sharp over-the-range microwave, a reverse installation process is required to remove your existing under-counter microwave from the wall. Whether you are replacing your existing Sharp microwave or taking down the wall-mount microwave permanently, this task should be completed with safety in mind. As with the installation, removing the microwave from the wall requires two people in order to complete the task.
Things You'll Need
- Drill
- Phillips-head drill bit
- Flat-head screwdriver
Instructions
-
-
1
Remove everything from the wall cabinet that the microwave is attached to and unplug the microwave.
-
2
Place the Phillips-head drill bit into the drill, and set the drill to reverse to pull out the screws.
-
3
Remove all the screws from the cabinet to detach the microwave. Have a friend hold the microwave in place while you remove all the screws.
-
4
Lift the microwave off the wall bracket and set on a safe, flat surface.
-
5
Remove all the screws from the wall bracket and lift the bracket safely from the wall.
-
6
Lift the wall anchors out of the wall using a flat-head screwdriver. Insert the tip of the screwdriver under the side of the wall anchor and lift gently to avoid breaking the anchor.
-
1
Microwave Ovens
- How to Hang a Microwave From a Countertop
- How to Remove Scratches From a Microwave Display
- How to Remove a GE Profile Microwave
- How to Remove a Microwave From the Wall
- How to Remove a Sharp Carousel Microwave
- How to Remove the Grease Filter From a Kenmore Microwave
- How to Remove a Microwave From a Wall Bracket
- How do I Remove the Plastic From the Door of a R410LW Sharp Microwave?
- How to Remove a Sharp Over the Stove Microwave
- How to Remove the Cover From a GE Microwave/Convection Oven
- How to Remove an Over the Stove Microwave From the Wall
- How to Remove a Wall Mounted Over the Range GE Microwave
