How to Replace a Kenmore Microwave Interior Light

Kenmore microwave ovens vary in relation to the settings and features they offer. Each model has an interior light that illuminates the microwave when the door is opened and when the microwave is in use. If the lightbulb burns out, it must be replaced so the microwave oven can be used effectively. The process for replacing the lightbulb is similar for each Kenmore microwave oven model.

Philips-head screwdriver

Instructions

- 1
  Unplug the power cord from the wall outlet.
- 2
  Press the door-release button to open the microwave door.
- 3
  Unscrew and remove the screws that hold the vent cover in place on the left side of the microwave interior.
- 4
  Slide the grille to the left. Pull straight out to remove.
- 5
  Remove the single screw above the door near the center of the inside of the microwave oven that secures the bulb holder in place.
- 6
  Lift up on the bulb holder to move it into position where the bulb can be replaced.
- 7
  Unscrew the lightbulb from the bulb holder. Remove the bulb.
- 8
  Screw the new lightbulb into the bulb holder.
- 9
  Push the bulb holder down until it is back in its original position. Replace the screw that holds the bulb holder in place.
- 10
  Replace the grille and the screws that hold it in place.

How to Mount a Microwave Hood

How Much Radiation Does a Microwave Oven Emit?

Microwave Ovens