How to Replace the Light Bulb on a GE JHP98G Microwave

The GE JHP98G Microwave Cooking Center is a now-discontinued appliance that combined a range and over-the-stove microwave in one. On the GE JHP98G, the microwave is a separate unit from the range and is located at the top of the appliance; however, the microwave is connected to the range. The microwave has two light bulbs, only one of which, the surface light, is it possible for you to service. The microwave oven light, which illuminates when the door is opened and when the microwave is in use, must be replaced by a service technician, as replacing it requires disassembling the microwave. Microwaves carry a lethal level of voltage -- even when unplugged -- and as such are too dangerous for the average homeowner to repair.

Things You'll Need

• Fluorescent light bulb

Show More

Instructions

1. • 1

     Unplug the appliance from the wall outlet, or turn off the breaker in your service panel.

   • 2

     Press one of the buttons on the sides of the light cover, on the bottom of the microwave oven. This releases the light cover, which is hinged. Lower the light cover and allow it to hang.

   • 3

     Rotate the light bulb one-quarter turn, then remove it. The bulb will only rotate in one direction.

   • 4

     Hold the new fluorescent bulb with both hands, near the end of each side.

   • 5

     Insert the prongs into the light sockets, then rotate the bulb to lock it into place.

   • 6

     Lift the light cover and snap it into position. Restore power to the GE JHP98G microwave.