How to Adjust the Back Legs on a Miele Dishwasher

When you are installing your Miele dishwasher, it's important to level the front and rear legs of the appliance so it fits properly below your kitchen top. If you're using the dishwasher and you notice the water retains in the back of the unit or items fall toward the back then you should remove your appliance from the wall and adjust the back legs so the dishwasher is level.

T20 Torx screwdriver

Instructions

- 1
  Turn of the electrical power to your Miele dishwasher from your kitchen circuit breaker.
- 2
  Pull your dishwasher out so you can access the bottom back side of the unit.
- 3
  Insert a T20 Torx screwdriver into one of the back legs on the bottom of the dishwasher.
- 4
  Turn the screwdriver clockwise to raise the machine and turn the screwdriver counter-clockwise to lower the dishwasher.
- 5
  Remove the screwdriver and adjust the other back leg, if necessary.
- 6
  Position the dishwasher back into place when you are finished and turn the electrical power back on from the circuit breaker.

How To Clean an Under-the-Counter Whirlpool Dishwasher

Drainage Problems With a Frigidaire Dishwasher

Dishwashers