Repairing the Seal on a GE Profile Dishwasher WD08X10075

Part number WD08X10075 is the lower door seal, also known as the door wiper gasket, installed on many models of General Electric dishwashers. The door wiper gasket ensures that water doesn't leak from under the dishwasher door. Composed of heavy rubber, the lower door seal deteriorates over time, requiring replacement. Rather than hiring a service technician to repair the door seal, replace it yourself to save cash and reduce time spent hand-washing dishes.

Screwdriver

Instructions

- 1
  Turn off the dishwasher breaker in your home's service panel. If you uncertain which circuit breaker to shut off, turn off the home's main breaker.
- 2
  Open the dishwasher door and remove the screws from the sides of the inner door panel. These screws secure the outer door panel to the front of the dishwasher.
- 3
  Close the dishwasher door and pull the outer door panel off the dishwasher.
- 4
  Open the dishwasher door and pull the door wiper gasket out of the channel located at the bottom of the door.
- 5
  Insert the new gasket into the channel, ensuring the lip is inserted downward into the channel.
- 6
  Close the dishwasher door and ensure the gasket is inserted evenly at the bottom of the door.
- 7
  Place the front panel back on the dishwasher door. Open the door and reinstall the screws around the perimeter of the inner door panel.
- 8
  Close the dishwasher door and restore the dishwasher's power source.

How to Replace the Door of a Bosch Dishwasher to Change the Color

Disconnecting a Natural Gas Dishwasher

Dishwashers