# How to Change the Control Board on a Bosch Dishwasher
Things You'll Need
- Screwdriver
- Needle-nose pliers
Instructions
-
-
1
Turn off the electrical power to your Bosch dishwasher from your kitchen circuit breaker.
-
2
Open the dishwasher door and remove the screws from the door’s top inside panel.
-
3
Close the dishwasher door without latching it all the way, and then lift up the door’s entire front panel exposing the inside parts.
-
4
Disconnect the wire connectors and ribbon cable from the control board at the top of the door using needle-nose pliers.
-
5
Press down on the tabs surround the control board using a flathead screwdriver. That loosens it from the door.
-
6
Lift up and remove the old control board. Insert the new control board into the same position so that it locks into place.
-
7
Reconnect the wire connector and ribbon cable to the control board. Place the front panel back onto the door.
-
8
Open the dishwasher door and reinsert the screws into the top inside of the door. Close the door again, and then turn the power back on from the circuit board.
-
1
- How to Replace the Door Seal on a Bosch Dishwasher DHX Series
- How to Change the Buttons on a Bosch Dishwasher
- How to Replace the Control Board on a Fisher Paykel Dishwasher
- How to Replace the Door of a Bosch Dishwasher to Change the Color
- How to Remove the Door From a Bosch SHV66A
- How Do I Replace the Control Module on a Bosch Dishwasher?
- How to Install the Soap Dispenser Door on a Bosch Dishwasher
- How to Get the Soap Door Off a Bosch SHX43C Dishwasher
- How to Change the Latch on a KitchenAid Superba Dishwasher
- How to Install the Circuit Board on a GE Dishwasher
- How Do I Change a Bottom Door Seal on a Bosch Dishwasher?
- How to Change the Kitchenaid Dishwasher Door Color
