# How to Replace a Faulty Drain Pump in a Dacor Dishwasher
Instructions
-
-
1
Unplug the dishwasher before you begin. Never work on your Decor dishwasher without first unplugging it.
-
2
Take the bottom dishrack out of the dishwasher. You will need easy access to the lower part of the appliance.
-
3
Remove the bolt on top of the spray arm. Use a wrench to remove the bolt that holds the spray arm in place, then remove the screen directly beneath the spray arm.
-
4
Remove the bolts that hold the drain pump in place, then remove the pump housing. Remove the bolt that secures the upper impeller, then remove the impeller, along with the food disposal blade, impeller hook and lower impeller. Keep all the washers and other small parts in a cup or glass so they do not get lost.
-
5
Discard any worn pieces you removed. If the pieces are still in good shape they can be reused with the new pump.
-
6
Place the new drain pump where the old one was and tighten the bolts to hold it in place. Reassemble the dishwasher by reversing the above steps.
-
1
- How to Replace a Whirlpool Dishwasher's Motor Bearings
- How to Replace the Wash Pump in an Electrolux Dishwasher
- How to Clear a Bosch Dishwasher Drain Pump
- How to Fix a Drain Pump on a GE Profile Dishwasher
- How to Install a Kenmore Dishwasher Drain Pump
- How to Replace a Kenmore Dishwasher Drain Pump
- How to Remove a Kenmore Elite Dishwasher Motor Pump
- How to Install a Drain Pump in a Frigidaire Dishwasher
- How to Remove a Trap Drain in a Kenmore Dishwasher
- How to Fix Pooling Water in a Dishwasher
- How to Remove the Drain Filter in a GE Monogram Dishwasher
- How to Remove the Drain Line in a Whirlpool Dishwasher
