Home Garden

How to Remove a Sump Filter in a GE Model PDW8280J00SS

Your GE dishwasher utilizes a sump to help clean your dishes. The sump fills with water and dish-washing detergent at the beginning of the wash cycle. The dishwasher pumps the water from the sump and through the spray arms. The water continues to pump through the sump and sprayers during the wash cycle. The sump filter catches food particles from dirty dishes to avoid having the water redistribute the debris. When your dishes aren't as clean as they should be at the end of the wash, remove the sump filter to clean and replace it.

Things You'll Need

  • Screwdriver
Show More

Instructions

    • 1

      Turn off the power supply to the GE dishwasher model PDW8280J00SS at the main breaker panel or unplug your dishwasher from the wall outlet beneath the sink if your dishwasher has a power cord.

    • 2

      Open the GE dishwasher door. Pull the bottom dish rack from inside the dishwasher.

    • 3

      Remove the two screws holding the sump cover to the floor of the dishwasher. Slide the cover to the left to expose the filter cap beneath it.

    • 4

      Lift the filter cap from the floor of the dishwasher. Clean any debris from the filter cap and around the sump area on the floor of the GE dishwasher.

    • 5

      Rinse the sump filter cap under running water. Replace the cap in the dishwasher floor. Slide the sump cover back over the filter cap and secure it with the screws you previously removed.

    • 6

      Replace the dish rack and reconnect the power to the GE dishwasher.