How Do I Install a Broan Switch?

A Broan switch replaces a typical light switch and incorporates a timer that will shut off any device it is connected to at a time set by the user. Broan switches are often seen in use for hot tubs and other devices that need to shut off periodically. Broan switches in the home or office are often used to control ceiling fans. For example, you can set the dial to expire at closing time to ensure the fan does not run unnecessarily throughout the night.

Screwdriver

Instructions

- 1
  Turn off the main switch at your breaker box to ensure that no power is going to the switch or fan.
- 2
  Remove the existing light switch plate by removing the screws with a screwdriver.
- 3
  Remove the screws holding the switch in place and pull it out of the wall. Loosen the terminals holding the wires in place with the screwdriver, pull the wires away from the switch and remove the switch.
- 4
  Connect the wires to the new Broan switch by matching the colors to the proper terminals. The black terminal is located near the top while the white and ground terminals are located near the bottom.
- 5
  Tuck the wires into the wall and secure the Broan switch in place using the screwdriver and supplied screws.
- 6
  Attach the switch plate using the screwdriver and supplied screws.
- 7
  Turn on the main switch at your breaker box to restore power.

Ceiling Fan Clockwise Vs. Counter Clockwise

Hampton Bay 191-707 Installation Instructions

Ceiling Fans