# How to Disassemble a Stackable Kenmore Washer Tub
A stackable Kenmore washer-and-dryer unit is a space-saving laundry solution for small homes and apartments. Although access to the washer on many stackable pairs is through a door on the front, some Kenmore combos feature a top-loading washer. Such washers' tubs have an agitator inside. It is balanced by springs. Common reasons to disassemble the washer tub include uneven load distribution and a leak.
Things You'll Need
- Flathead screwdriver
- Philips screwdriver
- Wrench
- Hammer
Instructions
-
-
1
Unplug the washer from the power source.
-
2
Pry the top front off the washer using a flathead screwdriver. Remove the screws behind the top front panel with the Philips screwdriver and the whole front panel will come off.
-
3
Remove the nuts that hold the washer tub in place using a wrench.
-
4
Remove the nuts that hold the springs to the tub.
-
5
Open the washer’s lid and unscrew the agitator’s lid. Loosen the nut under the agitator’s lid and lift the plastic agitator cover out of the washer.
-
6
Hit the spanner nut with a hammer counterclockwise to loosen it. Remove the nut from the tub.
-
7
Pull the washer tub out of the front panel.
-
1
Appliance Repair
- How to Replace the Tub Seal on a Frigidaire Stackable Washer
- How to Repair and Remove the Tub Seal on a Kenmore Washer
- How to Replace the Washer Tub in a Kenmore 110.45872400
- How to Fix a Tub Seal on a Frigidaire Stackable Washer Dryer
- How to Change the Tub Seal for a Kenmore Stackable Washer Dryer
- How to Replace a Tub Seal on a Kenmore Front Load Washer
- How to Change the Front Tub Seal on a Kenmore Washer
- How to Change a Kenmore Washer Valve
- How to Disassemble a Kenmore Elite HE3 Washer
- How to Remove the Front Panels of a Kenmore HE3T Washer
- How to Disassemble the Front of a Kenmore Refrigerator
- How to Replace a Water Pump in a Stackable Kenmore
