# How to Replace the Igniter on a Magic Chef Model 3121XRS
The Magic Chef 3121XRS is a freestanding gas oven range manufactured by the Maytag appliance company. The igniter is connected to the gas supply assembly. When the oven is turned on, the igniter produces a flame from the gas supply to create heat in the oven. If the igniter is defective or damaged, the Magic Chef oven will not function correctly. Replace the faulty igniter to restore your oven to proper working condition.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Disconnect the oven power cord. Turn off the gas supply connected to the unit.
-
2
Open the oven door. Pull the racks all the way out. Lift up and pull toward you to remove them from the oven.
-
3
Remove the screws at the back of the bottom oven panel. Lift the panel up and away from the oven to remove it.
-
4
Remove the screw holding the faulty igniter in place near the back of the inside of the oven toward the right side. Unplug the electrical harness leading to the igniter. Remove the igniter from the oven.
-
5
Position the new igniter inside the oven. Install the screw that holds the igniter to the burner assembly. Plug the wire harness into its socket.
-
6
Replace the bottom panel. Install the screws along the back of the panel to hold it in place.
-
1
Appliance Repair
- How to Replace the Gasket Seal on a Dacor Oven
- How to Replace the Igniter on a Thermador Gas Cooktop
- How To Replace the Igniter on a Maytag Oven
- How to Replace the Fan on a Magic Chef Wine Refrigerator
- How to Replace the Hinges on a KitchenAid Oven
- How to Replace the Oven Igniter in a GE XL44 TM Gas Range
- How to Fix a Magic Chef Oven Door Hinge
- How to Replace the Oven Sensor in a Roper Stove
- How to Replace the Electronic Controller on the Magic Chef Gas Oven
- Installing the Ignition in a Magic Chef CGR3765ADC Oven
- How to Replace a Glow Igniter on the Maytag Gemini
- How to Replace the Oven Door on a Whirlpool Electric Range Model Number RF3661XDW0
