# How to Remove the Panel Display From a Thermador Wall Oven
The Thermador built-in wall oven has a control panel located at the top of the oven, above the oven’s door. If you must repair the control board, you must first remove the panel display cover. Removing the panel takes only a few minutes and will offer you complete access to the control board for repair.
Things You'll Need
- Phillips screwdriver
Instructions
-
-
1
Turn off the power to the Thermador wall oven at the electrical breaker box.
-
2
Grasp the knobs on the display panel and pull them toward you to remove them.
-
3
Remove the screws located along the panel’s frame using a Phillips screwdriver.
-
4
Lift the panel off the control board to access the interior of the display. You do not need to remove the buttons or lenses from the panel to remove it.
-
1
Appliance Repair
- How to Remove the Oven Wiring From a Range
- How do I Remove the Residue of Wallpaper Glue From a Wall?
- How to Remove the Top of a Kenmore Self-Cleaning Oven
- How to Remove the Door on a Dacor CPS127
- How to Disconnect the Oven Section From an Electric Kenmore Stove
- How to Remove the Front Panel From a Samsung Washer
- How to Remove the Handle From a Whirlpool Oven Glass Cooktop
- How to Remove the Front Panel From a GE Eterna Dishwasher
- How to Remove a Microwave From the Wall
- How do I Remove a Sharp Undercounter Microwave From the Wall?
- How to Remove the Front Panel From a Fridge
- How to Remove an Adhesive Patch From the Wall
