# How to Locate the Belt on a Sears Kenmore Washer
The Kenmore brand of automatic washing machines by Sears covers a wide range of models, each with a distinct set of cycles and features. Each model uses a motor and set of pulleys to control the tub and agitator during a wash cycle. The belt connects the pulley system, allowing it to function correctly. In some situations, the belt may need to be inspected or replaced.
Instructions
-
-
1
Unplug the Kenmore washing machine power cord. Turn off the hot and cold water inlet faucets.
-
2
Disconnect the water hoses from their connectors on the back of the Kenmore washer. Set the ends of the hoses in a bucket to collect any dripping water.
-
3
Lay the washing machine on its side so the bottom and belt can be easily accessed. A pair of pulleys is visible on the bottom of the unit. The belt connects the two pulleys.
-
4
Lift the belt off the pulleys if it needs to be removed.
-
1
Appliance Repair
- How to Replace the Transmission in a Kenmore Washer
- How to Replace the Boot on a Kenmore HE3
- How to Change the Front Tub Seal on a Kenmore Washer
- How to Replace the Microwave Door Frame on a Sears Kenmore Microwave
- How to Replace the Rubber Seal on a Front-Load Kenmore Washer
- How to Change a Coupler on a Sears Kenmore Washer
- Where Does the Belt Go on a Kenmore 400 Washer?
- How to Access the Belt on My Frigidaire Washer
- How to Fix the Belt on a GE WBSR3000G1WS Top-Loading Washer
- How to Adjust the Belt on a Maytag Washer
- Kenmore Automatic Washer: How to Tighten the Belt
- How to Fix the Belt on a GE Washer
